{"title":"Z\/G Chassis","description":"","products":[{"product_id":"alaria-tech-350z-z33-diff-cooler-kit","title":"Z\/G Differential Cooler Kit","description":"\u003cp\u003eAlaria Technical Manufacturing is proud to introduce our bolt-in Nissan 350Z Differential Cooler Kit!\u003c\/p\u003e\n\u003cp\u003eFor anyone that has driven their car in an environment that includes lots of consecutive twists and turns, you have most likely noticed the downfalls of the factory differential system.  It is very common for racers to only see a few laps on a track before the oil in the differential gets well above its operating range, and in those cases you will see anything from unpredictable changes in how the car drives due to an overheated limited slip- to pressure build up and fluid escaping from the vent and spilling on to the track and the underside of your car. Both of these scenarios can become very dangerous when the car is being pushed to its limits. Overheating of the differential is also breaking down the fluid at a much faster rate than a fluid that stays in its optimal temperature range will. Fluid that is overheated and broken down will cause premature wear to your expensive drivetrain components like the ring and pinion and your high dollar limited slip differential.\u003c\/p\u003e\n\u003cp\u003eWe have worked for countless hours to provide a solution that includes nothing but high grade, motorsports quality parts and a design that is not only easy to install but also aesthetically pleasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included in the kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAlaria Technical Nissan 370Z\/350Z Differential Cooler Mount and Shroud in a durable black powdercoat\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eComplete Stainless\/ locking Install hardware kit\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSetrab Oil Cooler\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSPAL Fan pack and shroud\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTilton fluid transfer pump\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAlaria Technical line and fitting kit utilizing XRP fittings\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAlaria Technical Adapter bracket and spacers for the Nissan 350Z chassis\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe full set up requires very basic tools and a slight mechanical ability to be installed.\u003c\/p\u003e\n\u003cp\u003eWiring is not included at this time.\u003c\/p\u003e\n\u003cp\u003e**Due to spatial constraints in the rear of the car, this assembly will not work with a factory exhaust, or aftermarket exhaust that fills the same location. We have verified fitment with most of the Single exhaust systems, but it should fit with many others, and there is always the option to trim the shroud if needed as we left plenty of room to do so.**\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Install Video:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/HRNu1ytnrhE\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Alaria","offers":[{"title":"With OEM or Nismo rear cover","offer_id":36968240873536,"sku":"ALA-350Z-DIFF","price":1079.0,"currency_code":"USD","in_stock":true},{"title":"With Z1 rear cover","offer_id":36968240906304,"sku":"ALA-350Z-DIFF-Z1","price":1109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/Nissan350ZZ33DifferentialCoolerKitfullkit.png?v=1680205817"},{"product_id":"nissan-power-steering-rack-6an-adapter-fittings","title":"Steering Rack 6AN Adaptor Fittings Nissan","description":"\u003cp\u003eIntroducing the Alaria Technical AN steering rack conversion fittings for Nissans.    \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe start with the highest quality XRP steel fittings and machine them to the correct depth to seal in your Nissan steering rack.   \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis \u003cspan style=\"text-decoration: underline;\"\u003epair\u003c\/span\u003e of fittings are the correct depth to be  used to convert your Nissan power steering high and low pressure ports to -6AN.  These fittings allow you to plumb your power steering system with trouble free, higher quality, AN style hoses instead of the clamp on or hardline style that is used from the factory.   \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eGreat for engine swaps and custom plumbing scenarios\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReplaces the incorrect fittings that came with other brands PS line and reservoir kits  \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSold as a pair for both high and low pressure ports\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSteel over aluminum for a stronger interface \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFits most Nissan steering racks found in 240sx, Silvia, Frontier, Xterra, 350Z, 370Z and many more\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Alaria Tech","offers":[{"title":"Default Title","offer_id":39306092609600,"sku":"ALA-PSR-6AN-AF","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/ALARIAPowerSteeringRack6ANAdaptorFittings.png?v=1679530570"},{"product_id":"mr2-electric-power-steering-pump","title":"Toyota MR2 Electric PS Pump","description":"\u003cp\u003eThese Genuine Toyota Electric Power Steering Pumps have proven to be very reliable and work very well in both Drift and Road Race cars alike.  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eBrand New\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eGenuine Toyota\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e-Use with the Alaria Technical bracket for easy mounting \u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Find the Alaria Technical Bracket \u003ca href=\"https:\/\/alariatech.com\/collections\/frontpage\/products\/alaria-eletric-power-steering-pump-bracket-suits-sw20-mr2-pump\"\u003eHere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFrequently asked questions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ: How much pressure do the pumps make?\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: Out of the box, we’ve seen the pumps generate 900-1000 psi, however there is a jam nut and adjustment screw on the pump housing, we’ve found that 1.5-2 turns will return 12-1300psi of output pressure.  Some data logs on Pro Drift cars have shown as much as 1500psi. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ: How much current do the pumps draw, and how should they be wired\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: Testing has shown that the pumps can draw 70-80 amps when under maximum load, as such the wiring will need to be robust, we usually recommend the use of a high current relay, or manually resettable circuit breaker that is accessible from the drivers location.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ: Do I need to use the smaller wires and connector for anything?\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: No. Toyota used them to control the pump via an external ecu dedicated solely to power steering, all that is required for the pump to work is the heavy gauge power and ground connections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ: How much noise does the system make?\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: The pumps are not overly loud, but certainly there is a noticeable amount of noise coming from them. We recommend isolating the mounting bracket from the chassis if noise is a concern, and keeping the pump out of the vehicle cabin to keep noise and vibration levels to a minimum.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ: Can I rotate the inlet fitting to suit my chosen location better?\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: NO. If you rotate the large inlet fitting, it will leak and you will not be able to make it stop. Consider yourself warned. We’ve tried it, other people have tried it, it doesn’t work.\u003c\/span\u003e\u003c\/p\u003e","brand":"Toyota","offers":[{"title":"Default Title","offer_id":39306092642368,"sku":"","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/SW20MR2ElectricPowerSteeringPump2.png?v=1680212291"},{"product_id":"winters-quick-change-skid-plate","title":"Quick Change Diff Skid Plate","description":"\u003cp\u003eWe are excited to bring back our Skid Plate for Winters 10” Quick Change Differentials! \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe were the first to bring this item to market under MA-Motorsports back in 2013 and are now selling the same design under the Alaria Technical product line.  \u003c\/p\u003e\n\u003cp\u003eOur Skid Plate protects the rear cavity as that’s the section that is prone to damage from steep banked track transmissions and curbing during off track scenarios. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e100% made in our Glen Arm, MD location out of CNC cut .100” steel for the side plates and 3\/16” for the “skid” portion.  This design keeps weight low and helps keep the fluid from pooling inside of it.  To further help keep fluid from getting trapped in the skid plate after a gear change, we added a small drain hole also.   \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMade in The USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFully TIG welded \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSimple paint protection makes repairing easy as apposed to Powdercoat \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSimple design protects the lowest part of the diff while keeping weight low\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCan be installed without removing the diff in most cases   \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits both 10 bolt and 6 bolt rear cover diffs\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Alaria Tech","offers":[{"title":"Default Title","offer_id":39306092675136,"sku":"ALA-QCSKID","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/ALARIATechWintersQuickChangeSkidplate_1.png?v=1680035434"},{"product_id":"eletric-power-steering-pump-bracket","title":"PS Pump Bracket for MR2 Pump","description":"\u003cp\u003eWe have been running the SW20 Toyota MR2 Power steering pumps in racecars and drift cars for years now and mounting them has always been involved and time consuming.    For this reason, Alaria Technical Innovations has designed a universal mounting solution to make the fabricator\/ installers life easier.\u003c\/p\u003e\n\u003cp\u003eOur Electric Power Steering Bracket is CNC cut and bent from one piece of  .100” thick cold rolled steel sheet and TIG welded for reliability under performance driving!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMultiple holes for bolt in options\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRaw steel finish for weld in option\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAll hardware to attach pump to bracket is included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProven design has been used on Pro drift cars for years\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCan be mounted vertically or horizontally\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSaves time and money\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTIG welded\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeighs only 22 ounces\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePUMP IS NOT INCLUDED but is available \u003ca href=\"https:\/\/alariatech.com\/products\/sw20-mr2-electric-power-steering-pump-new-oem-toyota?_pos=4\u0026amp;_sid=e40ac5ab8\u0026amp;_ss=r\"\u003ehere\u003c\/a\u003e in our online store\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":39306092707904,"sku":"ALA-ELECTRIC-PSP","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/ALARIAElectricPowerSteeringPumpBracket_SuitsSW20ToyotaMR2Pump_-1.png?v=1679529262"},{"product_id":"tilton-600-series-floor-mount-pedal-box-bracket","title":"Bracket for Tilton 600 Series Floor Mount Pedals","description":"\u003cp data-mce-fragment=\"1\"\u003eMade from .095\" steel, with 6 positions of adjustment in 1.0\" increments, this is a great time saving solution to mounting these pedals in your racecar. Simply weld to the floor of the car, and attach the pedal box to the mount using M8x1.25 hardware.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDesigned to fit select Tilton 600 Series Floor Mount Pedal Boxes in either 2 or 3 pedal configurations.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e7.5\" Wide x 8.5\" Tall x 0.625\" Thick \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: This mount does not fit all Tilton pedal boxes. See our other product range for other Tilton pedal box mounting solutions.\u003c\/strong\u003e   \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis part will fit the following 600 series pedal boxes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e72-617 -2 Pedal Under Foot brake\/ clutch\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e72-618 -2 Pedal under Foot brake\/ throttle\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e72-616 -3 Pedal under foot \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":39378705645632,"sku":"ALA-TILPBM6UF","price":214.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/AlariaTechWeld-InTilton600SeriesFloorMountPedalBoxBracket4.png?v=1742387458"},{"product_id":"z-g-chassis-door-pull-pair","title":"Z\/G Door Pulls","description":"\u003cp data-mce-fragment=\"1\"\u003eIf you've driven a car without door panels, you know the pain of trying to get the door open. To make life easier, the folks at Alaria Technical has made these door pulls. Designed to slide over the ball on the end of the factory door handle cable, they provide a firm, secure place to pull.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePrinted from flexible TPU plastic\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBright red to increase visibility \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFinger opening is 1.25\"\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e*Price is for a pair of handles*\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e**These may fit other chassis, but at present are only verified to fit the Nissan 350Z\/ 370Z and Infiniti G35\/ G37 chassis**\u003c\/strong\u003e\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":39389866786880,"sku":"ALA-ZG-DOORPULL","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/TechZ-GChassisDoorPull-pair.png?v=1680036065"},{"product_id":"universal-oil-catch-can","title":"Universal Oil Breather Tank","description":"\u003cp data-mce-fragment=\"1\"\u003eThe ALARIA Universal Breather Tank is designed with the following features:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eTig Welded Aluminum tank, built in the USA at our Glen Arm, MD facility\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eCleanable K\u0026amp;N filter\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eInternal baffle to redirect the oil to stay in the chamber\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eCNC Billet inlet port plate w\/ 3x -10 AN ORB Female\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e-10 AN ORB drain\/ drain back port\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eUncoated Aluminum\u003c\/span\u003e\u003c\/h6\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e* We can also produce lines for your engine combo using the highest quality XRP Pro Plus and Race Crimp supplies. Please call or email to inquire!\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**May interfere with factory cruise control or AC components**\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":39408547954752,"sku":"ALA-UNIVOC","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/alariatechuniversaloilcatchcan2.png?v=1679538250"},{"product_id":"tilton-600-800-900-series-floor-mount-pedal-box-bracket","title":"Bracket for Tilton 6\/8\/900-series Floor Mount Pedals","description":"\u003cp data-mce-fragment=\"1\"\u003eMade from 12-gauge steel with 6 positions of adjustment in 1.0\" increments, this is a great time saving solution to mounting these pedals in your race car. Simply weld to the floor of the car and attach the pedal box to the mount using M8x1.25 hardware.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDesigned to fit select Tilton 600\/800 series floor mount pedal boxes in either 2 or 3 pedal configurations.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e5.125\" Wide x 9.25\" Tall x 0.625\" Thick\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: This mount does not fit all Tilton pedal boxes.   See our other product range for other Tilton pedal box mounting solutions.\u003c\/strong\u003e   \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis part will fit the following pedal boxes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e72-603 -3 Pedal Floor Mount 600-series\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e72-604 -2 Pedal Floor Mount brake\/clutch 600-series\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e72-803 -3 Pedal Floor Mount 800-series\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e72-804 -2 Pedal Floor Mount brake\/clutch 800-series\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e72-903 -3 Pedal Floor Mount 900-series\u003c\/strong\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":39418534723648,"sku":"ALA-TILPBM6FM","price":195.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/AlariaTechWeld-inTilton600-800-900-seriesFloorMountPedalBoxbracket2.png?v=1680034500"},{"product_id":"fuel-cell-fire-suppression-bracket","title":"Fuel Cell Fire Suppression Bracket","description":"\u003cp data-mce-fragment=\"1\"\u003eDesigned to mount on the corner of a fuel cell, these Fuel Cell Fire Suppression Brackets ensure your fire suppression nozzle is solidly mounted and aimed at your fuel pump assembly, while remaining unobtrusive.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese brackets are verified to fit Radium and Fuel Safe Fuel Cells, other fitment is not guaranteed at this time. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong\u003eHole for the nozzle is 5\/8\"\u003c\/strong\u003e\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":39421899243584,"sku":"ALA-FCFIRE","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/AlariaTechFuelCellFireSuppressionBracket-withAlarialogo9.png?v=1679533918"},{"product_id":"dual-master-booster-delete","title":"Dual Master Booster Delete","description":"\u003cp\u003eThe ALARIA “DMBD” (Dual Master Booster Delete) is finally available! \u003cbr\u003e\u003cbr\u003eCurrent applications include the Nissan S-Chassis family of vehicles ( Nissan S13, S14, S15 240sx, 180sx, Silvia, etc.) along with the Nissan 350Z and Infiniti G35 and Toyota\/ Subaru GT86\/ FRS\/ BRZ platforms.  More applications are coming, please inquire.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis setup eliminates the OEM booster and master cylinder and replaces them with two independent Master Cylinders (Tilton) and allows true bias adjustment via the balance bar and optional remote bias knob in the cabin just like a pedal box.   \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe understand a lot of people want the “industry standard” 6:1 ratio, but having the ability to make the pedal softer or harder on the fly, will make any driver happy.  Depending on application, ratios will be configurable in a decent range similar to that of aftermarket pedal assemblies. We thought this feature was worth the wait and we hope you do too!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaster Cylinder and Balance Bar are NOT INCLUDED \u003c\/strong\u003e\u003cstrong\u003eand can be purchased separately\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**THIS PART IS FOR OFF-ROAD USE ONLY** Not intended for road going vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBillet Rocker arm with adjustable pedal ratio\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTIG Welded, Zinc coated bracket \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAllows the use of Motorsport grade braking components and adjustment without the need to fabricate mounting\/ plumb a pedal box. \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustable pedal ratio provides ability to dial in brake pedal leverage\/ feel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrue dual masters which makes front and rear bias adjustment possible (in cockpit adjustment available with the addition of a bias adjustment knob)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSafer in the rare case of a MC failure you would still have one axles worth of brakes\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhen running a large cam setup with little vacuum you will not need a vacuum pump for your booster\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBetter pedal feel for brake modulation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWill pass Formula Drift Pro Spec rules \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo cutting or drilling of the car is required\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMADE IN THE USA! \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/yAnbqkqCHps\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Nissan 350Z possible pedal ratios are:\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e5.42\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e5.61\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e5.80\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e5.99\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.18\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.37\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.56\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Nissan S-Chassis possible pedal ratios are: \u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"165\" height=\"204\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e5.63\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e5.83\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.03\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.23\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.43\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.63\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.83\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe GT86 Chassis possible pedal ratios are:\u003c\/p\u003e\n\u003ctable data-sheets-baot=\"1\" data-sheets-root=\"1\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e\u003ccol width=\"120\"\u003e\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.81\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6.09\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6.22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Alaria","offers":[{"title":"S-Chassis","offer_id":39440652075072,"sku":"ALA-DMBD","price":495.0,"currency_code":"USD","in_stock":true},{"title":"350Z","offer_id":39440652107840,"sku":"ALA-DMBD-Z","price":495.0,"currency_code":"USD","in_stock":true},{"title":"GT86\/ FRS\/ BRZ","offer_id":40543884869696,"sku":"ALA-DMBD-GT86","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/AlariaTechnicalDualMasterBoosterDelete_6.png?v=1680038694"},{"product_id":"power-steering-pump-outlet-fitting","title":"Toyota Power Steering Fitting","description":"\u003cp data-mce-fragment=\"1\"\u003eFrom the factory, Toyota designed a hard line setup for the pressure outlet of the MR2 SW20 Power Steering Pump. When using the pump in an aftermarket situation, oftentimes the outlet fitting ends up being a straight fitting with a crush washer, always leaving the possibility of a leak. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe hunted for a better solution, and found a fitting with the appropriate inverted flare and enough length to seal in the pump housing like a factory line, while converting to a -6AN for ease of assembly.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese M16x1.5 Inverted flare fittings are custom made to our spec and fit other Toyota pumps where other off the shelf fittings did not.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e**For use with MR2 power steering pumps, found\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/ma-motorsports.com\/collections\/power-steering\/products\/sw20-mr2-electric-power-steering-pump-new-oem-toyota\" title=\"MR2 Power Steering Pump\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ma-motorsports.com\/collections\/power-steering\/products\/sw20-mr2-electric-power-steering-pump-new-oem-toyota\"\u003ehere\u003c\/a\u003e**\u003c\/strong\u003e\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":39686800310336,"sku":"MR2-PSPUMPFITTING","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/ToyotaMR2SW20PowerSteeringPumpKit_3_44895775-00ae-49f7-af2c-25c2066672a0.png?v=1680041327"},{"product_id":"mr2-power-steering-pump-kit","title":"Electric Power Steering Pump Kit","description":"\u003cp data-mce-fragment=\"1\"\u003eWe've been selling these pieces individually for some time now, but wanted to streamline the purchase for those looking to get all three. \u003cspan\u003eWe've also included a 2-pin Anderson Multipole connector kit, and the option of an Allstar Performance Reservoir.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKit includes:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Toyota SW20 MR2 Power Steering Pump\u003c\/li\u003e\n\u003cli\u003eAlaria Technical Mounting Bracket\u003c\/li\u003e\n\u003cli\u003ePump Outlet Fitting\u003c\/li\u003e\n\u003cli\u003eElectrical connector\u003c\/li\u003e\n\u003cli\u003eReservoir (Optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFrequently asked questions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ: How much pressure do the pumps make?\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: Out of the box, we’ve seen the pumps generate 900-1000 psi, however there is a jam nut and adjustment screw on the pump housing, we’ve found that 1.5-2 turns will return 12-1300psi of output pressure.  Some data logs on Pro Drift cars have shown as much as 1500psi. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ: How much current do the pumps draw, and how should they be wired\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: Testing has shown that the pumps can draw 70-80 amps when under maximum load, as such the wiring will need to be robust, we usually recommend the use of a high current relay, or manually resettable circuit breaker that is accessible from the drivers location.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ: Do I need to use the smaller wires and connector for anything?\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: No. Toyota used them to control the pump via an external ecu dedicated solely to power steering, all that is required for the pump to work is the heavy gauge power and ground connections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ: How much noise does the system make?\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: The pumps are not overly loud, but certainly there is a noticeable amount of noise coming from them. We recommend isolating the mounting bracket from the chassis if noise is a concern, and keeping the pump out of the vehicle cabin to keep noise and vibration levels to a minimum.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ: Can I rotate the inlet fitting to suit my chosen location better?\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA: NO. If you rotate the large inlet fitting, it will leak and you will not be able to make it stop. Consider yourself warned. We’ve tried it, other people have tried it, it doesn’t work.\u003c\/span\u003e\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Yes","offer_id":40427884216384,"sku":"","price":669.98,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":40427884249152,"sku":"ALA-MR2-SW20-STEERING-PUMP-KIT","price":584.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/products\/ToyotaMR2SW20PowerSteeringPumpKit_6.png?v=1680041183"},{"product_id":"harness-bar-nissan-370z-and-new-z-rz34","title":"370Z\/ New Z (RZ34) Harness Bar","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBLOWOUT SALE!  Clearing inventory. 25% off...\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe here at MA-Motorsports have a very strong background in fabricating track ready roll cages, and we have taken that knowledge and applied it to a Nissan 370Z harness bar that not only looks good, but backs up those looks with a quality and strength that is unmatched in the market today! Mounts to OE seat belt holes up top(retains factory seat belts), and the stabilizing bars mount to two existing bolts in the rear to provide a safe, and solid mounting solution. All hardware provided for install, some slight trimming of carpet is needed. Harness and seat options available, contact us with any questions!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFits all Nissan Z cars from 2009 to present (2023) including the new Z (RZ34). \u003c\/strong\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-Mounts to factory Holes\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-Tie downs bolt to factory studs\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-Retains Factory seat belts\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-Durable Powder Coat Finish (Other color options available at a cost)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-Harness retainers built into bar\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e-Quality Hardware\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":39831266394176,"sku":"ALA-370-HB","price":524.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/Alaria-370Zharnessbar-e1438705754124.jpg?v=1689870795"},{"product_id":"dual-master-booster-delete-z-g-abs","title":"Z\/G Dual Master Booster Delete (ABS)","description":"\u003cp\u003e\u003cstrong\u003eLIMITED QUANTITY AVAILABLE...\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ALARIA “DMBD” (Dual Master Booster Delete) for ABS Specific Tilton 79 series Master Cylinders.  \u003cbr\u003e\u003cbr\u003eCurrent applications include the Nissan 350Z, 370Z, G35 and G37. More ABS specific applications are coming including Toyota GT86, MK5 Supra and others.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis setup eliminates the OEM booster and master cylinder and replaces them with two independent Master Cylinders (Tilton) and allows true bias adjustment via the balance bar and optional remote bias knob in the cabin just like a pedal box.   \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe understand a lot of people want the “industry standard” 6:1 ratio, but having the ability to make the pedal softer or harder on the fly, will make any driver happy.  Depending on application, ratios will be configurable in a decent range similar to that of aftermarket pedal assemblies. We thought this feature was worth the wait and we hope you do too!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaster Cylinder and Balance Bar are NOT INCLUDED \u003c\/strong\u003e\u003cstrong\u003eand will need to be purchased separately\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**THIS PART IS FOR OFF-ROAD USE ONLY** Not intended for road going vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBenefits include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBillet Rocker arm with adjustable pedal ratio\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTIG Welded, Zinc coated bracket \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAllows the use of Motorsport grade braking components and adjustment without the need to fabricate mounting\/ plumb a pedal box. \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustable pedal ratio provides ability to dial in brake pedal leverage\/ feel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrue dual masters which makes front and rear bias adjustment possible (in cockpit adjustment available with the addition of a bias adjustment knob)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSafer in the rare case of a MC failure you would still have one axles worth of brakes\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhen running a large cam setup with little vacuum you will not need a vacuum pump for your booster\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBetter pedal feel for brake modulation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWill pass Formula Drift Pro Spec rules for 2023 Season\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo cutting or drilling of the car is required\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMADE IN THE USA! \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yAnbqkqCHps\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePossible pedal ratios are:\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e5.42\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e5.61\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e5.80\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e5.99\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.18\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.37\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e6.56\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":40061941547072,"sku":null,"price":659.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/IMG_8641.heic?v=1711653190"},{"product_id":"370z-rear-bulkhead-panel","title":"370Z Rear Bulkhead Panel","description":"\u003cp\u003eThe ALARIA 370Z rear bulkhead panel is a simple and elegant solution to separating the driver from fuel, oil, coolant etc.    This panel can be used for vehicles with rear mounted radiators, fuel cells, accusumps and other flammable or otherwise hot liquids you want to, or your race series wants you to be separated from while on the track.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC Laser cut from 16g 5052 Aluminum\u003c\/li\u003e\n\u003cli\u003eCAD Designed for superior fitment\u003c\/li\u003e\n\u003cli\u003eHand bead rolled for rigidity and aethetics\u003c\/li\u003e\n\u003cli\u003eMade in Maryland, USA\u003c\/li\u003e\n\u003cli\u003ePlease check with your race scrutinizer\/ sanctioning body if this is legal for your class of racing as a firewall\u003c\/li\u003e\n\u003cli\u003eIncludes aluminum panel and bulb seal for sealing to rear window surface\u003c\/li\u003e\n\u003cli\u003eSimple Rivet or rivnut on installation.  \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":40549903925312,"sku":"","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/IMG_3509.heic?v=1740425036"},{"product_id":"e46-bmw-door-pulls","title":"E46 BMW Door Pulls","description":"\u003cp data-mce-fragment=\"1\"\u003eIf you've built a car without door panels, you know the pain of trying to mount a device to get the door open. To make life easier, we have made these door pulls specifically for the BMW E46 chassis. Designed to slide over the barrel on the end of the factory door handle cable, they provide a firm, secure place to pull and engage the door latch mechanism. \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePrinted from flexible and extremely durable TPU plastic\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBright red to increase visibility \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFinger opening is 1.25\"\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e*Price is for a pair of cable pulls*\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e**These require you to cut off the OEM white plastic hook on the lever end of the BMW door cable.   This exposes the thin barrel that our pulls then attach to**\u003c\/strong\u003e\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":40607344525376,"sku":"DP-E46","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/Untitleddesign-29.png?v=1745330417"},{"product_id":"d-m-b-d-heat-shield","title":"D.M.B.D Heat Shield","description":"\u003cp\u003eDoes your brake fluid get hot and\/ or does your race series mandate a heat shield for your master cylinders?  If so this part will help keep things cool and get you through Tech inspection....\u003c\/p\u003e\n\u003cp\u003eThe ALARIA DMBD Heat Shield is designed specifically for the those with Alaria Dual Master Booster Deletes that want or need a little protection from heat on their master cylinders.   This part is designed to fit tight to the inboard most MC and shield it from potential heat sources whether they be headers or turbos\/ downpipes.   \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCAD Designed\u003c\/li\u003e\n\u003cli\u003eCNC Laser cut\u003c\/li\u003e\n\u003cli\u003eCNC Bent\u003c\/li\u003e\n\u003cli\u003e18g Stainless Steel\u003c\/li\u003e\n\u003cli\u003eHand TIG welded \u003c\/li\u003e\n\u003cli\u003eNo hardware needed, simply slips behind the nuts on the inboard MC and retighten\u003c\/li\u003e\n\u003cli\u003eSimple design that holds tight to the MCs to save space in engine bay\u003c\/li\u003e\n\u003cli\u003eEasily trimmed for clearance of your particular brake line routing or other obstacles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are a rather universal fit and may require some trimming depending on specifics packaging and application.   \u003c\/p\u003e\n\u003cp\u003e***Designed for LHD DMBD location but a RHD version could be in the future, please contact us if interested.\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":40679184400448,"sku":"DMBD-HS","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/IMG_5300_-_Edited.png?v=1752586084"},{"product_id":"gt86-gr86-door-pulls","title":"GT86\/ GR86 Door Pulls","description":"\u003cp data-mce-fragment=\"1\"\u003eIf you've built a car without door panels, you know the pain of trying to re-mount the OEM device to get the door open. To make life easier, we have made these door pulls specifically for the GT86\/ GR86 Chassis. Designed to slide over the barrel on the end of the factory door handle cable, they provide a firm, secure place to pull and engage the door latch mechanism. \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThese fit 2013 to 2025 FRS, BRZ, GT86, GR86, ZN6, etc.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePrinted from flexible and extremely durable TPU plastic\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBright red to increase visibility \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFinger opening is 1.25\"\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e*Price is for a pair of cable pulls*\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":40725028143168,"sku":"DP-GT86","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/IMG_5740-Edited.png?v=1755624811"},{"product_id":"alaria-camp-running-hat","title":"Alaria Camp\/ Running Hat","description":"\u003cp\u003eWe had a VERY SMALL run of these hats made up for us by a local shop.  They are Otto brand camp hats except the Navy Blue option which is a running hat that is a super light, breathable fabric.   \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e3 Color options in Camp or \"5 panel\" style:\u003c\/p\u003e\n\u003cp\u003e-Orange \u003c\/p\u003e\n\u003cp\u003e-Grey\u003c\/p\u003e\n\u003cp\u003eBlack\u003c\/p\u003e\n\u003cp\u003eOnly one option for the running hat\u003c\/p\u003e\n\u003cp\u003e-Navy Blue\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Orange","offer_id":40726440312896,"sku":null,"price":35.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":40726440345664,"sku":null,"price":35.0,"currency_code":"USD","in_stock":false},{"title":"Navy","offer_id":40726440378432,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":40726440411200,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/IMG_5789.heic?v=1755783621"},{"product_id":"universal-l-tab-mounting-brackets","title":"Universal \"L\" Tab mounting brackets","description":"\u003cp\u003eThe ALARIA universal \"L\" shaped mounting tabs are thin enough that you can bend them if needed but sturdy enough still to mount various sheetmetal panels, switch panels,  and other light weight items with ease.   While you can make these yourself, the low cost and convenience of having some in your fabrication arsenal is a great time saver.   \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCome in strips of SIX tabs per strip\u003c\/li\u003e\n\u003cli\u003eSimply break a tab off as you need it \u003c\/li\u003e\n\u003cli\u003ePerfect for mounting tinwork and sheetmetal panels\u003c\/li\u003e\n\u003cli\u003e1\/8\" holes for common pop rivet mounting\u003c\/li\u003e\n\u003cli\u003eCan be drilled out to #10 (or 5mm) size screws easily or even a rib-nut\u003c\/li\u003e\n\u003cli\u003e1\" legs with holes at 0.75\" from bend \u003c\/li\u003e\n\u003cli\u003eLaser Cut\u003c\/li\u003e\n\u003cli\u003eCNC bent \u003c\/li\u003e\n\u003cli\u003e.063\" 5052 Aluminum material\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":40812907331648,"sku":"ALA-LBRCK","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/de5a5351-5fa3-43af-8c5a-92bf46e247a5.png?v=1763402545"},{"product_id":"alaria-m81-woodland-camo-windbreaker","title":"ALARIA M81 Woodland Camo Windbreaker","description":"\u003cp\u003eEXCITING New Windbreakers are here in M81 Woodland camo!\u003c\/p\u003e\n\u003cp\u003eSuper high quality and durable windbreakers featuring:\u003c\/p\u003e\n\u003cp\u003e-Mesh lined, Draw string hood\u003c\/p\u003e\n\u003cp\u003e-Lightweight and packable\u003c\/p\u003e\n\u003cp\u003e-Water Resistant (not water proof)\u003c\/p\u003e\n\u003cp\u003e-Two external hand pockets\u003c\/p\u003e\n\u003cp\u003e-Two internal mesh pockets\u003c\/p\u003e\n\u003cp\u003e-ALARIA bar logo on front right chest and \"A\" logo on rear\u003c\/p\u003e\n\u003cp\u003e-Machine washable \u003c\/p\u003e\n\u003cp\u003e-Available in Small, Medium, Large, X-Large and XX-Large.\u003c\/p\u003e\n\u003cp\u003e*LIMITED QUANTITIES* \u003c\/p\u003e","brand":"Alaria","offers":[{"title":"S","offer_id":41100920356928,"sku":null,"price":64.95,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":41100920389696,"sku":null,"price":64.95,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":41100920422464,"sku":null,"price":64.95,"currency_code":"USD","in_stock":true},{"title":"XL","offer_id":41100920455232,"sku":null,"price":64.95,"currency_code":"USD","in_stock":true},{"title":"2XL","offer_id":41100920488000,"sku":null,"price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/366A6DBF-A43A-42CD-AD3A-C0AA3C64720B.jpg?v=1778069231"},{"product_id":"alaria-t-shirt-black","title":"ALARIA T-Shirt BLACK","description":"\u003cp\u003eWe got ourselves some real nice T-Shirts to share with you all.  They are printed right here in Glen Arm, MD on high quality Comfort Colors brand shirts.    These are soft and not too thin but not heavy either.  \u003c\/p\u003e\n\u003cp\u003eFeaturing the Alaria \"bar\" logo on the front right chest and the larger Alaria \"A\" logo on the back.   \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBlack only.   \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLimited quantities!\u003c\/p\u003e","brand":"Alaria","offers":[{"title":"2XL","offer_id":41100924715072,"sku":"ALA-Tblk-1","price":25.0,"currency_code":"USD","in_stock":true},{"title":"XL","offer_id":41100924747840,"sku":"ALA-Tblk-2","price":25.0,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":41100924780608,"sku":"ALA-Tblk-3","price":25.0,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":41100924813376,"sku":"ALA-Tblk-4","price":25.0,"currency_code":"USD","in_stock":true},{"title":"S","offer_id":41100924846144,"sku":"ALA-Tblk-5","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/IMG_18482_0580cad4-1792-48f2-a39b-a7f194e9e814.heic?v=1778071054"},{"product_id":"2jz-ge-vvti-engine-hoist-brackets-copy","title":"2JZ-GTE Engine Hoist Brackets","description":"\u003cp\u003eAlaria engine hoist brackets for Toyota 2JZ-GTE (turbo) VVTI and Non-VVTI engines.   Are you looking for a safe, secure and aesthetically pleasing way to lift up your 2JZ-GE engine?  Lost your OEM brackets or never had them?   These are designed to bolt directly to the cylinder head and give you a nice, easy, secure and level bracket to hook your chain or strap to when removing or installing the engine.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits all 2JZ-GTE Engines with and without VVTI\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and bent in Maryland, USA\u003c\/li\u003e\n\u003cli\u003eMade from 0.25\" and .0.188\" Thick Steel\u003c\/li\u003e\n\u003cli\u003eZinc plated for long life\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003cli\u003e100% made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*Please see our other items for the 2JZ-GE VVTI and 1JZ applications.\u003c\/p\u003e\n\u003cp\u003e**Please be aware that due to inconsistencies in the zinc plating process some brackets may have light scratches under the plating and\/ or less uniform finishes.   None of which affects how the product works or its longevity.   \u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":41280251625536,"sku":"2JZGEVVTI-EHB","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/98b834a9-b96d-4040-85f9-6d593a60d3ae.png?v=1782226465"},{"product_id":"1jz-gte-engine-hoist-brackets","title":"1JZ-GTE Engine Hoist Brackets","description":"\u003cp\u003eAlaria engine hoist brackets for Toyota 1JZ-GTE (turbo) VVTI and Non-VVTI engines.   Are you looking for a safe, secure and aesthetically pleasing way to lift up your 2JZ-GE engine?  Lost your OEM brackets or never had them?   These are designed to bolt directly to the cylinder head and give you a nice, easy, secure and level bracket to hook your chain or strap to when removing or installing the engine.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits all 1JZ-GTE Engines with and without VVTI\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and bent in Maryland, USA\u003c\/li\u003e\n\u003cli\u003eMade from 0.25\" and .0.188\" Thick Steel\u003c\/li\u003e\n\u003cli\u003eZinc plated for long life\u003c\/li\u003e\n\u003cli\u003eHardware included\u003c\/li\u003e\n\u003cli\u003e100% made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*Please see our other items for the 2JZ-GE VVTI and 2JZ applications.\u003c\/p\u003e\n\u003cp\u003e**Please be aware that due to inconsistencies in the zinc plating process some brackets may have light scratches under the plating and\/ or less uniform finishes.   None of which affects how the product works or its longevity.   \u003c\/p\u003e","brand":"Alaria","offers":[{"title":"Default Title","offer_id":41280292520000,"sku":"2JZGEVVTI-EHB","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/0585\/1456\/files\/IMG_2351-Edited.png?v=1782227701"}],"url":"https:\/\/alariatech.com\/collections\/z-g-chassis.oembed?page=3","provider":"Alaria","version":"1.0","type":"link"}